The IP67 Orca enclosure series offers protection for larger cameras of up to 62 x 62mm cross section (for instance Sick Ranger, AVT Prosilica range, Basler Runner, Flir A300 etc.). Smaller cameras also fit into the Orca with special adapter plates, if a large ring light or lens requires more room. It is available in three standard length with different rear walls and front lids. Equipped with the larger 3” window and 65mm aperture diameter it is possible to use wide-angle lenses without obstruction. Even fish-eye lenses with more than 180° viewing angle can be used with the dome lid. The standard windows can also be used for thermal imaging cameras in the NIR range up to approx. 2500nm. With a germanium window, the Orca can also be used with infrared cameras in the LWIR range.
For lenses up to 85mm diameter (78mm front lid) and cameras up to 62x62mm cross section (depending on edge radius), e.g.:
Antelope Pico, AOS Promon 502, Automation Technology C5, AVT Prosilica, Basler Racer, Baumer LX, Cognex Dataman 300, Dalsa Boa, Dalsa Linea Lite, E2V DIVIINA, Emergent HB, Flir A50/70, Flir A3xx, Flir Oryx, Imaging Source DMK Z12, Imperx Bobcat, Kappa Zelos, Keyence IV500, LMP HD1200, Lucid Helios, Micro-Epsilon TIM, NIT MC1003, Optris Pi, Photonis Nocturne U3, Photonfocus MV-1, Pixellink PL-B781, Sensopoart V10/V20, Satir UPC, Sick Ranger, Sinacam HDC-1, Sony FCB, SVS Vistek Exo, Vision&Control pictor M, Xenics Gobi 640, Xiris XVC-1000/1100, and many more.